- Otras empresas de Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
A Study on the Stability of Standard Platinum Resistance Thermometer in the Temperature Range from 0°C through 720°C
Stabilities of standard platinum resistance thermometers (SPRTs) were tested in the temperature range from 250°C to 720°C. The reason the SPRT stability should be tested not only at the maximum temperature but also at a few other temperatures is explained. Five specially made SPRTs with different filling gases were tested for this purpose. These SPRTs were annealed at four different temperatures (720°C, 675°C, 450°C, and 250°C) for up to 2000 hours. Two SPRTs with higher partial oxygen pressure showed excellent stabilities in the temperature range from 675°C to 720°C, and the total changes in their Rtp during annealing at 675°C for 200 hours were equivalent to less than 0.8 mK. But they were unstable at 250°C and 450°C with drift rates as high as 43 mK per 100 hours at 450°C. SPRTs with lower partial oxygen pressure showed very good stability in the temperature range from 250°C to 450°C, but the one with the lowest partial oxygen pressure showed upward drift in its Rtp in the temperature range from 675°C to 720°C. The factors which caused SPRT drifts were investigated and are discussed.
- Inicio
- Productos
- Novedades de Fluke Calibration
- Calibración eléctrica
- Calibración de radiofrecuencia
- Equipo de adquisición de datos y pruebas
- Calibración de temperatura
- Calibración de humedad
- Calibración de presión
- Manómetros de pistón
- Controladores/Calibradores
- Monitores de presión
- Balanzas de pesos muertos
- Monitores y calibradores manuales
- Handheld Pressure Calibrators
- Calibración de datos de aire
- Monitores ambientales
- Accesorios de calibración de presión
- Sistemas personalizados de calibración de presión
- Software de calibración de presión
- Calibración de flujo
- Calibradores de procesos
- Software de calibración
- Servicio y soporte técnico
- Todos los instrumentos de calibración
- Comprar
- Novedades
- Capacitación y eventos
- Literatura y educación
- Soporte Técnico
- Service Request (RMA)
- Programas de servicio
- Servicio técnico
- Base de Conocimientos
- Acreditaciones
- Centros de servicio autorizados
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuales de productos (guías de usuario)
- Hojas de datos sobre la seguridad (SDS)
- Safety, Service, and Product Notices
- Descargas de software
- Sobre Nosotros