- Otras empresas de Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Experimental Study and Computer Modeling of the Triple Point of Argon System
The triple point of argon is a defined fixed point in ITS-90 for calibration of standard platinum resistance thermometers (SPRTs). A new triple point of argon system with multiple re-entrant wells was developed. This system was tested to evaluate the duration and quality of the argon triple-point temperature plateau. The testing results showed that the plateau can be as long as 100 hours with the temperature change less than 0.05 mK. The re-entrant wells’ uniformity testing showed that the temperature is consistent among the multiple re-entrant wells. Uncertainty analysis shows that the combined uncertainty of the argon system is 0.25 mK (k = 2). In order to study the heat transfer process and the influence on the thermal equilibrium of the argon system during the realization of the triple-point of argon plateau, finite element analysis (FEA) modeling was carried out to simulate the thermal conductivity, convection, and radiation inside the argon system. The FEA simulation results are described and discussed in this paper. According to the simulations results, suggestions are provided in order to quickly reach thermal equilibrium and obtain a long, stable plateau in the triple point of argon system.
- Inicio
- Productos
- Novedades de Fluke Calibration
- Calibración eléctrica
- Calibración de radiofrecuencia
- Equipo de adquisición de datos y pruebas
- Calibración de temperatura
- Calibración de humedad
- Calibración de presión
- Manómetros de pistón
- Controladores/Calibradores
- Monitores de presión
- Balanzas de pesos muertos
- Monitores y calibradores manuales
- Handheld Pressure Calibrators
- Calibración de datos de aire
- Monitores ambientales
- Accesorios de calibración de presión
- Sistemas personalizados de calibración de presión
- Software de calibración de presión
- Calibración de flujo
- Calibradores de procesos
- Software de calibración
- Servicio y soporte técnico
- Todos los instrumentos de calibración
- Comprar
- Novedades
- Capacitación y eventos
- Literatura y educación
- Soporte Técnico
- Service Request (RMA)
- Programas de servicio
- Servicio técnico
- Base de Conocimientos
- Acreditaciones
- Centros de servicio autorizados
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuales de productos (guías de usuario)
- Hojas de datos sobre la seguridad (SDS)
- Safety, Service, and Product Notices
- Descargas de software
- Sobre Nosotros