- Otras empresas de Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Low Voltage Traceability and Uncertainty Evaluation for High Accuracy Thermocouple Calibration Utilizing a Modern Automated Potentiometer
The Hart Scientific Division of Fluke Corporation manufactures a family of high quality noble metal thermocouples intended for laboratory applications. The calibration laboratory is required to calibrate these thermocouples to very low levels of uncertainty. Noble metal thermocouples are calibrated by fixed point over the range of 0 °C to 1000 °C. The temperature uncertainty components that contribute to the total uncertainty are easily dealt with in this laboratory because the laboratory has the capability for low uncertainty calibration of SPRTs. The equipment and procedures used in the SPRT process were easily adapted to thermocouple calibration. However, the voltage measurement aspects of the calibration are not so simple. The voltages generated vary between 1.7 mV and 16 mV, and the sensitivities vary between 8 V/°C and 24 V/°C de-pending on thermocouple type and temperature. With expanded uncertainty requirements be-tween 0.01 °C and 0.15 °C, nanovolt measurement accuracy is required. To further complicate matters, the Hart Scientific laboratory is an accredited laboratory with a high volume workload (relatively speaking) and strict quality control requirements; any solution proposed would have to be suitable for such an environment.
- Inicio
- Productos
- Novedades de Fluke Calibration
- Calibración eléctrica
- Calibración de radiofrecuencia
- Equipo de adquisición de datos y pruebas
- Calibración de temperatura
- Calibración de humedad
- Calibración de presión
- Manómetros de pistón
- Controladores/Calibradores
- Monitores de presión
- Balanzas de pesos muertos
- Monitores y calibradores manuales
- Handheld Pressure Calibrators
- Calibración de datos de aire
- Monitores ambientales
- Accesorios de calibración de presión
- Sistemas personalizados de calibración de presión
- Software de calibración de presión
- Calibración de flujo
- Calibradores de procesos
- Software de calibración
- Servicio y soporte técnico
- Todos los instrumentos de calibración
- Comprar
- Novedades
- Capacitación y eventos
- Literatura y educación
- Soporte Técnico
- Service Request (RMA)
- Programas de servicio
- Servicio técnico
- Base de Conocimientos
- Acreditaciones
- Centros de servicio autorizados
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Manuales de productos (guías de usuario)
- Hojas de datos sobre la seguridad (SDS)
- Safety, Service, and Product Notices
- Descargas de software
- Sobre Nosotros